DMP Electronics XR500 SERIES Dokumentacja Pobierz pdf (Strona 150)

100

101

Program>Communication P aths

Paths

Account Number: The Account Number is a 1 to 5 digit number used to identify which panel is

sending a message. Enter the account number sent to the SCS-1R Receiver. Messages may be sent to

a central station or via PC Log Reports to a PC. The default is 12345.

NET, CELL, 232 and DD - The range of valid account numbers for a panel is 1 to 65535. For

accounts of four digits or less, do not enter leading zeros.

CID - Choose an account number between 1 and 9999.

Transmit Delay: Enter the length of time that the panel should wait before sending burglary reports

to the central station. Select a time from 1 to 60 seconds. Alarm bells and relay outputs are not

delayed during this period. Enter 0 (zero) to disable transmission delay.

Path: Up to eight communication paths may be programmed. Each path is designated as a primary or

backup communication route. Path 1 is always Primary but other paths may be programmed as

additional primary or backup.

Each primary path establishes a new path group. A path group is made up of the primary path and its

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 335 336

Komentarze do niniejszej Instrukcji

Brak uwag

DMP Electronics XR500 SERIES Dokumentacja Strona 150

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa DMP Electronics XR500 SERIES