DMP Electronics SCS2 Instrukcja Użytkownika Pobierz pdf (Strona 31)

JTAG-Booster for AMD ÉlanSC520

JTAGEL5d.doc 31

/TOP

If the option /TOP is used the option /OFFSET= specifies the address where the

programming ends (plus one) instead of the starting address. This option is very

important for Intel CPU architectures, because target execution always starts at

the top of the address space.

/FILE-OFFSET=hhhhhh

If FILE-OFFSET is specified, the first hhhhhh bytes of the file are skipped and not

programmed to target.

Default: /FILE-OFFSET=0

Abbreviation: /FO=

/LENGTH=hhhhhh

The number of programmed bytes may be limited to LENGTH. If no LENGTH is

specified the whole file is programmed.

Default: /LENGTH=4000000 (64 MByte)

Abbreviation: /L=

/VERIFY

If this option is specified, the result is verified on a cell by cell (cell=8bit or 16bit)

basis instead of a complete verify after programming. If you want both a cell by

cell verify and a complete verify after programming, please use a additional

command line with the verify function. See chapter 2.3 “Verify a Flash Device with

file”.

/NODUMP

In case of a verify error the contents of the flash memory is written to a file with

the extension .DMP. With /NODUMP you can suppress this feature.

/ERASEALL

Erase the whole flash device. If this option isn't set, only those blocks are erased

where new data should be written to.

/NOERASE

This option prevents the flash device from being erased.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 50 51

Brak uwag

DMP Electronics SCS2 Instrukcja Użytkownika Strona 31